Wireless Automatic Water Pump

PRODUCT FEATURE :

• This model has dry run protection so it only starts the motor if water is present in the underground tank or sump.
• Suitable for 0.1 HP to 5.0 HP Motor, Protect motor from dry running.
• Motor ON OFF LED indication provided.
• Water Level indication provided for both tanks.
• Auto and manual mode indication provided 
• Supply voltage : 220-270 V AC,
• Relay : 40 A
• Sensing element : S.S sensor.
• 433 MHZ RF Transmitter & Receiver, 90 meter range.
• It also work if there is obstacle between the transmitter and receiver.
• ABS Body.

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

HOW AUTOMATIC WATER LEVEL CONTROLLER WORKS

• This model automatically switches ON and OFF Motor. When the water level of the overhead tank becomes low means water gets down from the middle sensor and water is present in the underground tank or sump, the motor gets started automatically. The tank starts filling up. when the water level reaches to the higher level, the motor automatically gets switched off.
• Auto and Manual mode switch available. In auto mode the motor starts and stops automatically. In manual mode the user can start and stop the motor by pressing the start and stop button of the controller. No
• Additional wiring is required to operate the motor manually. 
• Also Suitable for MCB Starter panel and submersible motor, see diagram above for connection.
• Fully automatic, controls from underground tank to overhead tank so no man power required. Long service Life.
• All signals passes in sensors through the AC filter circuit that improve life of sensor,
• Isolated supply provided
• Sensor fault detection provided, if sensor got failed LED start blinking.